Leica iCON aps 200, Руководство пользователя

Страница: 53 / 84

The radiated output power of the instrument is below the radio frequency
exposure limits. Nevertheless, the instrument should be used in such a manner
that the potential for human contact during normal operation is minimised. To
avoid the possibility of exceeding the radio frequency exposure limits, keep a
distance of at least 30 cm between you (or any other person in the vicinity)
and the instrument.
The product meets the limits for the maximum permissible exposure of the
guide-lines and standards which are force in this respect. The product must
be used with the recommended antenna. A separation distance of at least 20
centimetres should be kept between the antenna and the body of the user or
nearby person within the intended application.
Country Head Body Limb
EU 0.5 W/Kg, 10-gram 0.5 W/Kg, 10-gram n/a
France 0.5 W/Kg, 10-gram 0.5 W/Kg, 10-gram 0.5 W/Kg, 10-gram
USA &
Canada
1.492 W/Kg, 1-gram 1.6 W/Kg, 1-gram n/a
Hereby, Leica Geosystems AG declares that the radio equipment
type iCON aps 200 is in compliance with Directive 2014/53/EU
and other applicable European Directives.
The full text of the EU declaration of conformity is avail-
able at the following Internet address: http://www.leica-geosys-
tems.com/ce .
FCC ID: RFD-ICA20X
FCC Part 15, 22, 24, 27 and 90
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1
.
This device may not cause harmful interference, and
2
.
This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications.
However, there is no guarantee that interference does not occur in a particu-
lar installation.
If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Radiation Exposure
Statement
Specific Absorption
Rate (SAR)
SAR limits
EU
USA
Technical Data 53