Leica GR10, Руководство по эксплуатации

Страница: 84 / 317

6: Context sensitive help
Logging session properties
The table below describes the additional logging session status information that is shown when the logging session
Name
is selected.
Field Description
Session name
The configured logging session name.
Data type
The configured data type.
Session
Priority
The configured session priority which determines the Smart clean-up tasks.
Go to GNSS management / Logging sessions / Smart clean-up tab for further information
and to enable the Smart clean-up functionality.
Session type
The configured session type, either
continuous
or
timed
.
Timed
allows specific logging intervals to be defined.
Logging rate
The configured rate at which the observations are logged.
Length of file
The configured file length. The file length defines how long data is written to one file
before a new file is created.
Log doppler
observations
Indicates if logging doppler observations is activated (yes) or deactivate (no) in the
logging session.
Log SNR
values
Indicates if logging SNR values in the RINEX file is activated (yes) or deactivate (no) in
the logging session.
Archive data to
Shows where the logging session data is archived.
Clicking on the SD Card link opens an FTP connection to the SD Card. This is only
possible when the FTP server access is enabled. To enable FTP server access go to
Receiver Setup / FTP server .
The FTP access to the SD card may not work in all browsers. Set the
FTP server access restrictions to
allow anonymous access
to ensure
SD card access via the browser link.. Go to Receiver Setup / FTP
server .
Auto delete
Shows when the logging session files are automatically deleted.
The SD card can run full when Auto delete is set to Never.
Archive to FTP
location
Indicates where the logging session data is archived. Click on the link
SD card
to access
the SD card via FTP.
Some browsers have limitations concerning their FTP capabilities.
Please use a dedicated FTP client in case you experience problems
while accessing files via FTP.
Remaining
repeats
This field is only shown for timed logging sessions. Shows the number of repeats
remaining.
Latest file
The file name of the last file that this logging session was written to.
83