Leica GeoPRO antenna – Installation Guide
6
Be careful removing the backing tape from the sticking blocks. Make sure that
you only peel off the tape and do not rip the adhesive from the backing tape.
3.
Mount the GeoPRO antenna on the vehicle roof.
Keep in mind that the GeoPRO antenna should mount with the whip antenna in
the forward position.
4.
Connect the blue GPS antenna cable to the blue
connector on the rear of the mojo3D display.
5.
Connect the purple cell modem antenna cable to
the purple connector on the rear of the mojo3D
display.
•
The cables must not be cut, kinked or bent tightly, as their performance will be
degraded and system failure may result.
•
Cables should be routed neatly back to the mojo3D.
•
The antenna must be mounted horizontally and not on an angle to ensure best signal
reception possible.
