Leica GeoPRO antenna – Installation Guide
3
1
Leica GeoPRO Antenna Installation
This manual contains instructions for installing and setting up the product to operate with
a Leica mojo3D. Read carefully though this manual before starting the installation. As
this product is used solely with the Leica mojo3D it is mandatory to observe the safety
directions and instructions contained in the corresponding user manual.
Prepare the GeoPRO
antenna
1.
Clean the cab roof to prepare for the installation of the antenna. Approved cleaning
products are denatured alcohol and Windex® glass cleaner.
2.
Connect the cable with the small connector to the GeoPRO antenna.
Start all antenna cable connections by hand before using the wrench to
tighten. Do not over tighten the cable connections. Run the threads to the
end and tighten only 1/8 turn more.
