Leica FLEXACAM C1, Руководство пользователя

Страница: 39 / 56

CONTROL Menu (Continued)
Manual white balance (AUTO OFF)
The "balance" function makes it possible to
adapt the camera chip to the ambient light so
that color-neutral images can be acquired.
Whenever possible, use a neutral gray chart
or another color-neutral object to obtain opti-
mum results.
If you want to use the automatic "White
Balance" mode choose the "Auto ON" function.
White balance
You can choose either an automatic mode
or use a manual mode to set the color gain
differently.
Adjusting the white balance manually
(recommended)
1. Place the gray chart or another color-
neutral object under the microscope so
that the entire field of view is filled in.
2. Press the "Balance" button. A white balance
is calculated and applied to the camera.
Alternatively, you can configure the foot-
switch to make a white balance.
3. If you do not have a neutral gray area in
the image or if the illumination has a very
strong color tint, you can manually set the
values for "RED LEVEL", "BLUE LEVEL" and
"BLACK LEVEL" until the image displays the
desired colors. The white balance mode
is always set to "MANUAL" after manually
adjusting the white balance, even if it was
set to "AUTO" previously.
Image process
Use the slider to adjust the different image
processes like "Gamma", "Sharpness" or "Noise
reduction" or use the switch to enable "Gray-
scale" (change image from color to black/white
mode) or "Negative" mode.
Orientation
With these switches you can flip the image
horizontally or vertically.
Digital zoom
With the slider or mouse wheel you can digitally
zoom in on the live image. On the right bottom
you can see the current digital magnification if
the value is greater than 1.0
×
(default).
FLEXACAM C1 User Manual User Menu – On-Screen Display (OSD) 39