Leica Digilux 2, Инструкция по эксплуатации

Страница: 175 / 192

Detailed guide / Review mode / 173
Data transfer to a computer/
Printing with direct connection to a printer
The LEICA DIGILUX 2 is compatible with the following
operating systems:
• Microsoft ® Windows®: Windows®98,
Windows®ME, Windows®2000 with Service
Pack 4, Windows®XP with Service Pack 1
• Apple® Macintosh®: Mac®OS 9, Mac®OS X
Various modes are available to transfer the data to a
computer or to control the camera remotely via a
computer, and for direct printout of the pictures. They
have to be set in advance – according to the desired
use. The factory setting –
MASS STORAGE – is
compatible with most operating systems.
The following Table lists the operating systems for the
uses concerned.
PTP mode
This setting can only be used on the most up-to-date
operating systems, such as Windows® XP and
MAC® OS X. Here, the LEICA DIGILUX 2 is recognized
as a “digital camera”. The operating systems auto-
matically launch Assistants for simple downloading of
the pictures and video files, or offer direct access to
picture editing programs, e. g.
Adobe®Photoshop®Elements®.
Remote control mode via the USB connection
This mode must be selected if the camera is to be
used with the LEICA USB Remote Control Software
(see p. 176).
Together, they allow control of the camera and imme-
diate downloading of pictures to the hard disk from
the computer. Furthermore, incremental pictures can
also be set and controlled in this way.
To install the software please refer to the next section,
instructions on use can be found in the help function
within the program.
USB mode For use with computers For direct connection
of a printer to the camera
Mass Storage Windows®XP with Service Pack 1, Models that support the
Windows®2000 Professional with Service Pack 4 USB Direct Print Standard
Windows®ME, Windows®98 SE oder Mac®OS X
(Version 10.1 or higher), Mac®OS 9.x
PTP Windows®XP with Service Pack 1 or Mac®OS X Models that support the
PictBridge Standard
Remote control Windows®2000, Windows®XP with Service Pack 1, –
Mac®OS X
Setting the function
In one of the setup menus
k
SETUP
2/3
/
3
(see
pp. 112/113/122) select the menu item O USB
MODE (3.23) and then the desired mode according to
the further menu instructions.
MASS STORAGE mode
The USB function is compatible with most operating
systems. In this case, the computer recognizes the
camera as an interchangeable hard disk or an external
card reader.
With Windows® computers: The camera is displayed
in Explorer with its own drive identifying letter.
With MAC® computers: The camera is displayed on
the desktop with a symbol for a drive.
Compatible operating systems