Leica Digilux 2, Инструкция по эксплуатации

Страница: 127 / 192

Detailed guide / The most important settings/controls / 125
4. After setting the year, press right on the direction
pad to go to the next line, where the sequence in
which the figures are shown can be adjusted.
You can use the direction pad or the central
adjustment dial to select between month/day/
year
(M/D/Y) , day/month/year (D/M/Y) or
year/month/day (Y/M/D) .
5. Press the
MENU
button (1.25) twice to save your
setting and to exit the menu system.
6. Check whether the date and time are set correctly
by turning the camera off and then back on again.
Note: Even if no battery is used or if it is flat and the
mains/charging unit is not connected, the date and
time setting is stored by a built-in buffer battery for
around 24 hours. However, after this period, the data
and time have to be reset as described above.
At the latest 24 hours after the capacity of a battery
remaining in the camera has expired, the date and
time
must be reset as described above.
Setting automatic switch off –
u
POWER SAVE
This function switches the camera to stand-by mode
after a certain length of time, which saves power, for
example by deactivating the viewfinder and monitor
LCDs. You can choose whether you want to activate
this function and, if so, after how long you want the
camera to switch to stand-by. In this way, you can tai-
lor this function to your own personal working
methods and also significantly extend the life of your
battery charge.
Notes:
• If you are running the camera directly from the
mains using the mains/charging unit, automatic
switch off is not available.
• If automatic switch off is activated and the battery
needs to be charged, you should turn the camera
off at the main switch (1.26) before connecting the
mains/charging unit to the camera socket. If you
leave the camera turned on in this situation, mal-
functions are possible.
Setting the function
In one of the setup menus k SETUP
1/2
/
3
(see pp. 112/113/122) select the menu item
u POWER SAVE (3.17) and follow the
further menu instructions.
Note: Even if the camera is in stand-by mode, it can
be turned on again at any time by pressing the shutter
release button (1.13) or by turning it off and back on
with the main switch (1.26).