Leica BLK ARC, Руководство пользователя

Страница: 11 / 38

NOTICE
Too much strain on the cable when bending it for a prolonged time
This may damage the cable.
Precautions:
▶ Ensure the cables on the underside of the BLK ARC are bent using the
corresponding guides.
For the AC/DC power supply:
WARNING
Unauthorized opening of the product
Either of the following actions may cause you to receive an electric shock:
•
Touching live components
•
Using the product after incorrect attempts were made to carry out repairs.
Precautions:
▶ Do not open the product!
▶ Only Leica Geosystems authorized service centers are entitled to repair
these products.
For the AC/DC power supply:
WARNING
Electric shock due to use under wet and severe conditions
If unit becomes wet it may cause you to receive an electric shock.
Precautions:
▶
If the product becomes humid, it must not be used!
▶ Use the product only in dry environments, for example in buildings or
vehicles.
▶ Protect the product against humidity.
1.6 Laser Classification
1.6.1 General
The following chapters provide instructions and training information about
laser safety according to international standard IEC 60825-1 (2014-05) and
technical report IEC TR 60825-14 (2004-02). The information enables the
person responsible for the product and the person who actually uses the
equipment, to anticipate and avoid operational hazards.
☞
According to IEC TR 60825-14 (2004-02), products classified as laser
class 1, class 2 and class 3R do not require:
•
laser safety officer involvement,
•
protective clothes and eyewear,
•
special warning signs in the laser working area
if used and operated as defined in this User Manual due to the low
eye hazard level.
General
Safety Directions 11