manualshive.com logo in svg

Leica Geosystems DD120 Series, Руководство пользователя

Поделиться
Скачать
Leica Geosystems DD120 Series Скачать руководство пользователя страница 58

10

Care and Transport

10.1

Transport

When transporting the equipment in the field, always make sure that you carry

the product in its original packaging or equivalent, and protect the equipment

against shock and vibration.

Never carry the product loose in a road vehicle, as it can be affected by shock

and vibration. Always carry the product in its container and secure it.
For products for which no container is available use the original packaging or

its equivalent.

When transporting the product by rail, air or sea, always use the complete orig-

inal Leica Geosystems packaging, container and cardboard box, or its equiva-

lent, to protect against shock and vibration.

When transporting or shipping batteries, the person responsible for the prod-

uct must ensure that the applicable national and international rules and regula-

tions are observed. Before transportation or shipping, contact your local pas-

senger or freight transport company.

10.2

Storage

Respect the temperature limits when storing the equipment, particularly in

summer if the equipment is inside a vehicle. Refer to "11 Technical Data" for

information about temperature limits.

Long-term battery storage is not recommended. If storage is necessary:

•

Refer to "Technical Data" for information about storage temperature range.

•

Remove batteries from the product and the charger before storing.

•

After storage recharge batteries before using.

•

Protect batteries from damp and wetness. Wet or damp batteries must be

dried before storing or use.

•

A storage temperature range of 0°C to +30°C/+32°F to 86°F in a dry envi-

ronment is recommended to minimise self-discharging of the battery.

•

At the recommended storage temperature range, batteries containing a

40% to 50% charge can be stored for up to one year. After this storage

period the batteries must be recharged.

•

Always try to use a ‘first-in first-out’ approach to minimise storage time.

10.3

Cleaning and Drying

Dry the product, the transport container, the foam inserts and the accessories

at a temperature not greater than 40°C/104°F and clean them. Do not repack

until everything is dry. Always close the transport container when using in the

field.

Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the con-

necting cables.

Transport in the field

Transport in a road

vehicle

Shipping

Shipping, transport of

batteries

Product

Storing

Damp products

Cables and plugs

58

Care and Transport

Содержание DD120 Series





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды