Page 22 of 61
3.5 Features and applications
3.5.1 JET Rapid Wire - Overview about features and applications
Print head cover
Stepped print head
cover
Beveled print
head cover
Features
•
1000 m/min maximum printing speed in
high quality
•
A special print head provides a very short
distance between print head and
substrate.
•
There are several approved inks
especially for cable applications available
•
Up to 800 m/min maximum printing
speed in high quality
•
For larger diameters
•
There are several approved inks
available for various applications
and substrates
Applications
•
Printing on cable/wire/tubes with
diameters up to 5 mm
•
Printing on cable/wire/tubes with
diameters larger than 5 mm
•
High speed printing with a maximum
print height of 2,5 mm.
Restrictions
•
Only 1 print line
•
There is a smaller range of approved
inks available than for the JET3up
•
There are 7 print modes available:
o
1 dot
o
Line mode
o
3x7 dots tower small
o
3x7 dots tower
o
5x5 dots small speed
o
5x5 dots small
o
5x5 dots
o
5x5 dots speed
o
7x5 dots
o
7x5 dots speed
•
The
diameter
of the substrate must not
be larger than 5 mm.
•
Only one print line
•
There is a smaller range of
approved inks available than for the
JET3up
•
There are 7 print modes available:
o
1 dot
o
Line mode
o
3x7 dots tower small
o
3x7 dots tower
o
5x5 dots small speed
o
5x5 dots small
o
5x5 dots
o
5x5 dots speed
o
7x5 dots
o
7x5 dots speed
•
The recommended
distance
between print head and substrate is
5 mm. Shorter distances bear the
risk of contaminating the print head,
larger distances may have a
negative effect on the quality of the
printouts.
Содержание JET Rapid
Страница 1: ...Technical information The new LEIBINGER High Speed Line Version 2 4 ...
Страница 2: ...Page 2 of 61 ...
