2
5. Follow the on-screen instructions:
•
InstallShield
®
will load automatically. A message box will appear, re-
minding you to disable any antivirus software. Click
OK
to continue.
•
Read the License Agreement. If you accept the agreement, click
YES
;
if you do not accept, click
NO
, and MapCreate will not be installed on
your computer.
•
Choose a destination folder for the program. You can accept the default
(recommended) or you can choose another location. Click
NEXT
to continue
the installation.
•
Select the type of setup, and click
NEXT
to continue the installation.
•
If you choose Custom install, select the components to install. Then
click
NEXT
to continue. With all your preferences determined, In-
stallShield will begin copying files.
•
The Setup Status window shows the progress of the installation. If
needed, the install will prompt you for additional discs. When asked, in-
sert the appropriate DVD and click
OK
to continue the setup. When the
program files have all been copied, InstallShield Wizard will display a
message that setup is complete. Click
FINISH
to close the wizard program.
•
After the MapCreate files have been installed on your computer, you
are prompted to install the MMC card reader drivers. Make sure the
card reader is
not
plugged in yet, then click
OK
to continue. (If you
stop the program, you can install the card reader later, but
MapCreate
will not run
until the card reader is installed
. To install later refer to
the instruction sheet that came with the card reader.)
