2
INSTALLING THE BATTERIES
Release the latch on the front of the battery case. Open the
compartment and install either an optional rechargeable battery or
eight "D" cell batteries into the adapter. For the longest life, we
recommend you use alkaline batteries. After installing the batteries,
close the case and plug the power cable on the battery case into the
sonar unit.
Turn the sonar unit on. If it doesn't work, make certain the battery
terminals are making good contact against the battery contacts. Also
check the wiring connections on the D-cell battery adapter. The red
wire on the power cable should be attached to the red wire on the D-cell
battery adapter and the power cable's black wire should be connected to
the black wire on the D-cell battery adapter.
If it still doesn't work, check the battery voltage. Most of the complaints
we receive about portable units result from stale batteries. Make
certain the ones you buy are fresh. Always remove batteries from the
battery compartment before storing the unit as dead batteries can leak
and corrode the contacts.
Install batteries in power case battery adapter.
"D" cell battery
