background image

1

Pub. 988-0147-601

PPP-13

Portable Power Pack

Installation Instructions

This power pack is designed for use with the following products: Eagle

FishEasy

 2, FishEasy

 2 T, FishEasy

 2 Portable and TriFinder

 2.

The PPP-13 package includes the power pack, battery adapter and a
portable transducer. Batteries are not included. The power pack has a
storage compartment for the portable transducer. The pack can be used
with eight "D" cell alkaline batteries or an optional sealed, rechargeable
battery.

The portable power pack expands the uses for your Lowrance or Eagle
sonar. You can use your sonar on your boat or take it to the dock, on a float
tube, on an ice fishing trip or use it as a second sonar in a friend's boat.

INSTALLATION

Recommended tools for installation include a slotted screw driver and
two adjustable wrenches. The following figure shows the proper
arrangement for the washers.

For a secure portable mount, attach the unit to the portable power

pack's gimbal bracket using the supplied gimbal knobs and washers as

shown above.

Gimbal bracket

Rubber washer

Plastic washer

Gimbal knob

Sonar unit

Содержание PORTABLE POWER PACK







Отзывы: