manualshive.com logo in svg

LEHNER VINERO, Инструкция по эксплуатации с перечнем запасных частей

Поделиться
Скачать
LEHNER VINERO Скачать руководство пользователя страница 11

11

3  Operating the 

VINERO

®

3.3  Switching on / off

Press the button. 

The speed of the agitator and the slide 

opening is displayed. The slide is always 

closed when switching on the drive motor.

> Speed 

60

  Slide 

29

Press the button.

The slide is opened, the green LED lights 

up.

The drive motor starts.

> Speed  60

  Slide   29 ok

If this message is displayed, a cable is 

damaged or a plug disconnected.

> Speed 

60

  Connecting spr.

Low temperatures can cause the empty indicator to respond slowly.  

To check the adjustment: 

Allow the spreader to run for approx. 1 minute with the slide closed. 

If the slide is then opened, the empty indicator must be activated  

after approx. 5 seconds. 

If this doesn't happen, move the empty indicator 5% into the negative 

range; see Settings and displays chapter, Adjusting the empty indicator.

Содержание VINERO














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды