BD
A Primar
y Con
tr
oller / Sec
ondar
y Con
tr
oller 22-02-17 (GB)
5
FUNCTION DESCRIPTION
A distinction is made between „offline operation“ and „online operation“ for the controllers:
„Offline-operation“:
The LEHMANN Captos and Captos iCharge locks can either be configured with master and programming cards or
with the LEHMANN Management Software LMS. In “offline operation”, the controllers are mainly used to supply
power to the locks.
If the locks are configured and managed in „offline mode“ with the LMS, then the locks are not directly networked
with the LMS via the customer‘s network. In this case, configuration changes are transferred to the locks using the
LEHMANN Data Transfer app and an NFC-enabled Android smartphone.
Primary controllers and secondary controllers supply the Captos and Captos iCharge locks with power via cable. Up
to 24 locks can be connected to one controller. A data cable is not required between the controllers in „offline ope-
ration“. If Captos locks are connected to the controllers, up to three controllers can be supplied with power from one
power supply unit. To do this, the controllers must be connected to one another with power connection cables. If
Captos iCharge locks are connected to the controllers, each controller must be supplied with power from a separate
power supply unit.
Figure: Schematic representation of „offline operation”
1
Netzteil (bei Captos Schlössern nur an jedem 3. Controller erforderlich)
CAPTOS iCharge
(max. 24 per Controller)
Daten-Verbindungskabel RJ11
Strom-Verbindungskabel Mini DIN
Primary oder Secondary Controller
(sofern zu einem späteren Zeitpunkt auf einen „Online-Betrieb“ gewechselt werden soll, ist mindestens ein Primary Controller notwendig.)
CAPTOS
(max. 24 per Controller)
1
1
1
1
1
CAPTOS iCharge
(max. 24 per Controller)
CAPTOS
(max. 24 per Controller)
1
Kupplung / Stecker zum Verbinden
von zwei Daten-Verbindungskabeln
Primary or secondary controller
(if you want to switch to „online operation“ at a later point in time,
at least one primary controller is required.)
Power supply unit (with Captos locks only required on every 3rd controller)
Data connection cable RJ12
Power connection cable Mini DIN
Coupling / plug for connecting two data connection cables
1
Netzteil (bei Captos Schlössern nur an jedem 3. Controller erforderlich)
CAPTOS iCharge
(max. 24 pro Controller)
Daten-Verbindungskabel RJ11
Strom-Verbindungskabel Mini DIN
Primary oder Secondary Controller
(sofern zu einem späteren Zeitpunkt auf einen „Online-Betrieb“ gewechselt werden soll, ist mindestens ein Primary Controller notwendig.)
CAPTOS
(max. 24 pro Controller)
1
1
1
1
1
CAPTOS iCharge
(max. 24 pro Controller)
CAPTOS
(max. 24 pro Controller)
1
Kupplung / Stecker zum Verbinden
von zwei Daten-Verbindungskabeln
„Online-operation“:
During „online operation“, the locks are managed and configured in the LEHMANN Management Software LMS
(license key „LMS Online“). The LMS is operated in the customer‘s IT infrastructure. The Captos or Captos iCharge
locks are connected directly to the customer‘s network and thus to the LMS via the primary controller. The
controllers supply the locks with power and also ensure data communication between the LMS and the locks. The
primary controller is connected to the customer‘s network via Ethernet cable and acts as a transfer point. At least
one primary controller is required for „online operation“. Several primary controllers can be used in a project. Up
to 24 locks and a total of up to 32 secondary controllers can be connected in series to a primary controller. The
controllers are connected to one another with connecting cables. Up to 24 locks can also be connected to each
secondary controller. If Captos locks are connected to the controllers, up to three controllers can be supplied with
