LEHMANN M410 L033-A01, Руководство по эксплуатации

Страница: 16 / 20

BD
A M410 L033-A01 /-A02 2018-04-24 (GB)
16
EMERGENCY POWER SUPPLY
If the battery are completely discharged and you cannot reach the battery compartment inside the furniture, you still
have the option of obtaining an emergency power supply if you have an external RFID reader. To do this, you can use
a standard power bank (additional rechargeable battery) with a USB port complying with the USB 2.0 standard.
A micro USB Type B connector is required for the emergency power supply of the RFID reader. Use the emergency
power supply only for a short period of time for the one-off opening of a lock. Before use, it is essential that you
should read the operating instructions of the power bank. Please proceed as follows:
U
U
First remove the protective rubber cap on the micro USB port on the underside of the RFID reader.
U
U
Connect the charged power bank to the RFID reader using the micro USB port.
U
U
Please take account of the operating instructions of the power bank, e.g. for starting and ending the
charging process.
U
U
Please do not perform any further actions until the RFID reader gives an acoustic and a visual signal
(see Acoustic and visual signals when inserting the battery).
U
U
Then open the lock with an authorised transponder card. Here you can use either a programmed
user card or the master card for emergency opening.
U
U
Then carefully disconnect the power bank from the RFID reader.
U
U
Replace the protective rubber cap on the micro-USB port of the RFID reader.
U
U
Replace the battery in the lock (see Getting started and changing battery).
U
U
Perform a function test (opening and closing) while the furniture is open.
CAUTION:
Emergency power supply is only possible if the RFID reader is mounted externally!
FIRMWARE UPDATE
With this locking system it is possible to perform a firmware update with the help of the update card.
Firmware updates are only made available on the website www.lehmann-locks.com when required
(e.g. technical necessity).
Further information on installation is provided together with the firmware update.
Please keep the update card carefully.
RFID reader L033-A01
Micro USB port for
emergency power supply
and firmware updates
RFID reader L033-A02