BD
A Cap
tur
a 100 MIF
ARE® / 22020-06-29 (GB)
3
FACTORY SETTINGS
The lock can be closed and opened at this point of time with one or more installation cards. After a Master card has
been programmed, the lock is in the operating mode “assigned use“ and the installation card cannot be used any
more.
CARE AND MAINTENANCE
U
U
Do not spill any liquid over or into the individual components of the lock, and never immerse the components in
any liquid.
U
U
The product should not be exposed to direct sunlight.
U
U
Clean the lock and the components with a clean, soft, damp cloth only.
U
U
Do not use any cleaning agents containing abrasives or solvents, as these may damage the housing.
U
U
Treating any of the electronic and mechanical components improperly or in any way other than described in
these operating instructions may lead to malfunctions and the loss of warranty.
U
U
Change the battery in good time. At the latest, when the lock issues corresponding battery warnings.
FUNCTIONAL DESCRIPTION
With the Captura 100 MIFARE® lock, you can conveniently lock and unlock your furniture. Non-contact RFID techno-
logy based on 13.56 MHz is used as the “key“. Two operating modes are available:
Operating mode
Description
Assigned use
There is a fixed assignment between the transponder cards and the locks. The user cards are
programmed or deactivated at the lock by means of a master card. The system thus allows
the granting of selective access authority for an item of furniture (e.g. cabinet), so that
only authorised persons with a transponder card have access. A transponder card can be
programmed simultaneously on multiple locks with “Assigned use“ operating mode. Up to 250
different transponder cards can be programmed per lock.
Shared use
With the user card, a user can use a free lock / storage of his choice. It is not possible to
program the user card using the master card. If a lock is closed with the user card, the user card
and the lock are coupled to each other. The card cannot be used at any other lock in “shared
use“ mode, and the lock will not accept any other user card. This coupling is only deactivated
when the user opens the lock again with his user card. The card can now be used for another
lock.
U
U
The battery must not be charged!
U
U
Keep the product away from children, as small parts may be swallowed!
U
U
Any persons swallowing batteries must seek immediate medical advice!
U
U
Damaged and/or leaking batteries may cause acid burns and/or poisoning!
Please note that the distance
between two or more locks
with an inserted battery must
be at least 10 cm (lateral
distance) and 15 cm (frontal
distance) during storage,
transport and operation.
>10 cm
>15 cm
