Lehle Sunday Driver, Руководство по эксплуатации

Страница: 19 / 20

What to do:
1. Connect your instrument to the Input socket (1)
of the Lehle Sunday Driver .
2. Connect the Output socket (3) of the Lehle
Sunday Driver with the Input socket of the
Lehle P-Split II .
3. Connect your amplifier to the DIR socket of the
Lehle P-Split II .
4. Connect your recorder to the ISO socket of the
Lehle P-Split II .
5. Switch the S/D selector (2) of the Lehle Sun-
day Driver in the D position, for “Driver“.
6. Adjust the Gain controller (5) so that the signal
is optimal for your recording equipment.
7. Done!
Note:
The Lehle P-Split II also has other functions as,
for example, inverting the phase at the ISO output
or an extra galvanic separation of the signal to get
rid of ground-loop noise. Please read the
Lehle
P-Split II operating manual for a precise expla-
nation of the use and effects of those features.
The Lehle Sunday Driver as a preamp for
mixer inputs
Due to their input impedance of around 10
KOhm, the line inputs on mixers are not suitable
for level-matched recording of high-impedance
signals from magnetic pickups (e.g. the single
coil and humbucker pickups on guitars and
electric basses). The signals from piezo pick-ups,
like those used on acoustic instruments, are also
too weak for the line inputs of a mixer. As in the
case of recording, the
Lehle Sunday Driver is
again an ideal tool here, for making a high-im-
pedance instrument signal into a low-impedance
instrument signal and amplifying it adequately
for the line input of a mixer. The
Lehle Sunday
Driver , with its input impedance of 1 MOhm (or
4 MOhm in S mode) amplifies the sensitive signal
of such instruments so that their sound arrives at
the mixer totally true to the original and complete
with all its details.
17