49
Levelling monitoring
This access platform is equipped with automatic and manual levelling and the state of levelling
is monitored with an inclination sensor. The sensor is located inside the connection box on the
right side of the chassis (figure 31). Similar sensor also tracks the angle of the platform and the
platforms automatic levelling is based on it. The second levelling sensor is located inside the
control panel box in front of the platform (figure 30).
Figure 30 Inclination sensor (chassis)
Inspection of the track tightness and adjustment
The tightness of the track is inspected and adjusted with the access platform raised on the
outriggers. The tracks must be inspected for the first time and adjusted, if necessary, after one
hour of use. After this initial inspection, the tracks should be checked once a week and adjusted
if necessary. At the same time, the sprocket bolts and nuts should be inspected to ensure that
they have not loosened. Take steps to keep the tracks appropriately tight. This has direct
impact on wear and tear of the track chassis and helps to ensure that the tracks do not come
off the sprockets.
Figure 29 Inclination (platform)
Содержание 135 NEO
