2 / 9
TX³ RCCBs
4P Neutral right side - up to 63A
Cat. N°(s): 4 030 08, 09, 10, 42, 43, 44
4. PREPARATION - CONNECTION
(continued)
Terminal arrangement:
. Terminals protected against direct finger contact IP20, wired device
. Alignment and spacing of the terminals permitting shutters with the other products via toothed supply busbars
. Terminal depth: 14 mm
. Terminal capacity: 60 mm²
. Screw head: mixed head, slotted head and Philips / Pozidriv no. 2
. Tightening torques:
- Minimum / Maximum: 1.2 Nm / 3.5 Nm
- Recommended: 2.5 Nm
Conductor types:
. Copper cables at the top and bottom of the product
- Cable cross-section:
Without ferrule
With ferrule
Rigid cable
1 x 0.75 to 50 mm²
or
2 x 0.75 to 16 mm²
/
Flexible cable
1 x 0.75 to 35 mm²
or
2 x 0.75 to 16 mm²
1 x 0.75 to 25 mm²
Required tools:
. For the terminals:
- 5.5 mm / 6.5 mm blade screwdriver recommended
- Pozidriv n°2 / Philips N°2 screwdriver recommended
. For the latching:
- 5.5 mm blade screwdriver recommended / 6 mm maximum
- Pozidriv n°2 / Philips N°2 screwdriver recommended
Manual actuation:
. Manual action via ergonomic 2 position handle:
- I-On, device closed O-Off, device open
Contact status display:
. By marking of the product:
- I-On : closed contacts
- O-Off : open contacts
Residual current trip display:
. Handle at the bottom position, the residual current is released
Lockout:
. Padlocks possible in the open or closed positions with padlock support (Cat. No. 4 063 03) and Ø5 mm padlock (Cat. No. 4 063 13)
or Ø6 mm padlock (Cat. No. 227 97)
Sealing:
. Possible in the open or closed positions
Labelling:
. Circuit identification by way of a label inserted in the label holder situated on the front of the product
Technical data sheet: F01543EN/01
Updated on: 01/09/15
Created on: 19/03/14
