5
STEP 1 Attach TV Bracket to TV
1.3 Attach TV Brackets to Your TV
Inset Holes
Cables
Rounded Back
1.2 Select TV Screw Length and Spacers
• Flat Back TV
[TV brackets
lay flat on your TV]
NO SPACER
SPACER NEEDED
• Flat Back TV
with
Extra Space Needed
[for deep inset holes
or cable interference]
• Rounded or
Irregular Back TV
[TV brackets NOT
resting flat on your TV]
A
B
Use
short
TV screws
01
.
Spacers
03
not needed.
Use
long
TV screws
01
and spacers
03
to
create extra space between the TV and TV bracket.
1.1 Select TV Screw Diameter
Only one screw size fits your TV.
M4
M6
M8
01
CAUTION:
Verify adequate thread engagement with your screw
01
,
washer
02
, spacer
03
combination AND TV bracket
04
/
05
.
— Too short will not hold your TV. — Too long will damage your TV.
NOTE:
If your TV
included inset spacers
or adapters, use them
UNDER the mount
hardware.
NO SPACER
SPACER NEEDED
Position the TV brackets
04
and
05
over your TV hole pattern as
shown - making sure the brackets are level.
IMPORTANT
:
The
tilt tension knobs
T
should be oriented to
the outside edges.
Install using the screw combination
A
or
B
you selected for your TV.
CAUTION:
Avoid potential personal injuries and property damage!
DO NOT use power tools for this step. Tighten the screws only enough
to secure the TV bracket to the TV. DO NOT overtighten the screws.
1
2
A
B
TOP OF TV
T
T
02
02
01
01
03
04
05
