9
a
b
TILT ADJUSTMENT
LEVEL ADJUSTMENT
REMOVING THE TV
EXTEND / RETRACT -- ONLY IF NECESSARY
1.
Disconnect cables.
2. Remove screw
11
.
3.
Lift TV up and off the arm assembly
8
.
08
11
11
08
1
3
2
11
08
05
08
R
T
TV Adjustments
Your TV should adjust easily when moved, then stay in place.
If your TV is too loose or too tight, adjust the side tension knob
T
.
NOTE:
Once your TV is in place, tighten the side tension knob
T
to prevent
unwanted movement.
Your TV should adjust easily when moved, then stay in place.
If your TV is too loose or too tight when moving, adjust bolts
R
using a 3/32 inch hex key (not supplied).
CAUTION:
Avoid potential personal injury or property damage!
DO NOT remove bolts
R
, only turn
enough for slight adjustment.
HEAVY! You may need assistance with this step.
Manage Cables
NOTE:
Additional tension can be applied using a 3/16 inch hex key (not supplied).
1
IMPORTANT
: Fully extend arm assembly
08
to ensure enough slack in cables.
1. Remove cable covers
C
by loosening the end (a), then sliding off (b).
2. Route your cables through the arms
08
.
3. Reattach cable covers
C
over the cables.
3
2
C
C
C
C
C
08
1. Loosen
screw
11
.
2. Level
your TV.
3. Retighten
screw
11
.
