LEGRAND Raritan SRC-0100, Руководство пользователя

Страница: 540 / 698

Chapter 9: Using SCP Commands
528
SCP example:
scp pdu-px2-030410-44599.bin
admin@192.168.87.50:/fwupdate
Windows PSCP command:
PSCP in Windows works in a similar way to the SCP.

pscp <firmware file> <user name>@<device
ip>:/fwupdate
Bulk Configuration via SCP
Like performing bulk configuration via the web interface, there are two
steps with the bulk configuration using the SCP commands:
a. Save a configuration from a source SRC.
b. Copy the configuration file to one or multiple destination SRC.
For detailed information on the bulk configuration requirements, see
Bulk Configuration
(on page 330).
To save the configuration via SCP:
1. Type the following SCP command and press Enter.
scp <user name>@<device ip>:/bulk_config.txt <filename>

<user name> is the "admin" or any user profile with
Administrator Privileges.

<device ip> is the IP address or hostname of the SRC whose
configuration you want to save.

<filename> is the custom filename you assign to the
"bulk_config.txt" of the source SRC.
2. Type the user password when prompted.
3. The system saves the configuration from the SRC to a file named
"bulk_config.txt."
To copy the configuration via SCP:
1. Type the following SCP command and press Enter.
scp bulk_config.txt <user name>@<device ip>:/bulk_restore

<user name> is the "admin" or any user profile with
Administrator Privileges

<device ip> is the IP address of the SRC whose configuration you
want to copy.