LEGRAND Raritan SRC-0100, Руководство пользователя

Страница: 227 / 698

Chapter 6: Using the Web Interface
215
4. Perform the desired action.

Make changes to the selected rule, and then click Save. For
information on each field, see Creating Role Based Access
Control Rules
(on page 213).

Click to remove it.

To resort its order, click or .
5. Click Save.

IPv4 rules: Make sure you click the Save button in the IPv4
section, or the changes made to IPv4 rules are not saved.

IPv6 rules: Make sure you click the Save button in the IPv6
section, or the changes made to IPv6 rules are not saved.
Setting Up a TLS Certificate
Important: Raritan uses TLS instead of SSL 3.0 due to published
security vulnerabilities in SSL 3.0. Make sure your network
infrastructure, such as LDAP and mail services, uses TLS rather
than SSL 3.0.
Having an X.509 digital certificate ensures that both parties in a TLS
connection are who they say they are.
Besides, you can create or apply for a multi-domain certificate with
subject alternative names.
To obtain a CA-signed certificate:
1. Create a Certificate Signing Request (CSR) on the SRC. See Creating
a CSR (on page 216).
2. Submit it to a certificate authority (CA). After the CA processes the
information in the CSR, it provides you with a certificate.
3. Import the CA-signed certificate onto the SRC. See
Installing a
CA-Signed Certificate (on page 217).
Note: If you are using a certificate that is part of a chain of certificates,
each part of the chain is signed during the validation process.
A CSR is not required in either scenario below:

Make the SRC create a
self-signed certificate. See Creating a
Self-Signed Certificate (on page 218).

Appropriate, valid certificate and key files are already available, and
you only need to import them. See
Installing or Downloading
Existing Certificate and Key
(on page 219).