LEGRAND LE06499AE, Инструкция по установке, использованию и техническому обслуживанию

Страница: 4 / 32

4
1. Safety guidelines
A cast resin transformer is an electrical equipment. It must be installed, protected and used in compliance
with the existing national and international Standards and Regulations. The possible improper installation
and use of a cast resin transformer may cause risks of electric shock or fire.
Please, read this installation manually carefully before: lifting, moving or energising the transformer.
Every operation on the transformer must be performed when the transformer is not energised..
Before operating on the CRT, make sure that the transformer cannot be put under voltage without your
permission..
Do not energise the transformer before having connected the core to earth..
Do not energise the transformer before having carefully and completely inspected it.
Do not get close to the cast resin transformer before having connected the windings to earth.
Do not access the transformer operation area or remove the protection devices when the transformer is
under voltage..
Each transformer generates a magnetic field. For this reason, any carrier of metallic devices as pacemakers
should not get closer than 3 m to an energised transformer.
This transformer must be installed according to the installation directions and preferably by a skilled and
qualified HV electrician.
Do not open, disassemble, alter or modify the transformer with the exception of special indications reported
in the Installation Manual.
All Legrand products must be opened and repaired only by personnel trained and authorized by Legrand.
Legrand is not responsible for any non-authorized opening or repair.
When moving the transformer or its components, always be aware of the risk of crushing.
When lifting the transformer, do not stand under suspended loads.