This product may be covered by patents found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details.
© 2018 Kenall Mfg. Co. All rights reserved.
www.kenall.com P: 800-4-Kenall F: 262-891-9701 10200 55th Street Kenosha, Wisconsin 53144
3
INSTALLATION INSTRUCTIONS
F-5419
8. Attach the sign panel by compressing the torsion
springs and inserting them into the slots on the
electrical gear plate.
9. Check installation by gently pulling on housing and
canopy to ensure it is securely held in place.
10. Energize AC supply, LED display will illuminate.
11. When provided with battery, charge battery for 24
hrs. prior to building occupancy.
II. RECESSED CEILING MOUNT
1. De-energize the circuit where the exit sign / exit
light will be installed.
2. Extend unswitched 24 hour AC supply of rated
voltage to junction box that will be used for
connection of equipment.
3. Install recessed housing above ceiling line and
secure using supplied hanger bars or by other
means, as deemed appropriate. Connect conduit to
supply access plate provided on recessed housing.
4. Route the wires into the electrical compartment.
5. Connect power supply accordance with local codes.
Wire connections as follows: line to Black lead;
Neutral to White lead. Connect green grounding
lead to supply grounding conductor.
6. When installing exit light (provided with battery
for emergency operation) connect battery leads to
terminals identified on driver board. Connect red
lead to terminal (positive) and black lead
to terminal marked – (negative).
7. Install electrical gear into housing and secure with
attachment screws.
