LEGRAND Dual band Access Point, Руководство пользователя

Страница: 14 / 42

1.11 / SNMP, UPNP & SYSLOG
SNMP
To enable SNMP (remote network
monitoring), click on
Enable SNMP .
Disable SNMP will be selected by default
(after a factory default reset).
In the
System Location and Contact fields,
specify a location and administration contact
details that will be displayed by the remote
SNMP console.
The
Community for read only access and
Community for read/write access settings
allow controlling SNMP access respectively in
read and read/write to the AP.
UPnP
To allow the AP to announce itself to the
network using
UPnP , select Enable UPnP .
By default, the UPnP is enabled to allow you
to use
Legrand Control Point Discovery
Utility.
Syslog
To enable system logging, click the Enable
Syslog button (enabled by default).
If you have chosen to remotely monitor the
Access Point’s system logs, check
enable
Network Report and select the monitoring
equipment machine’s IP address and UDP
port in the field
Syslog Server IP Address
and Syslog Server Port respectively .
After changing settings on this page, click the
Apply button to validate your changes and
click the Save button to save your changes
for future reboots.
14
USER GUIDE FOR LEGRAND DU
AL
B
AND WIRELESS A
CCESS POINT