LEGRAND DRD3 Скачать руководство пользователя страница 3

Fcc notice

This equipment has been tested and found to comply with the limits for a  

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in 

a residential installation. This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one or more of 

the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•   Connect the equipment to an outlet on a circuit different from that to which 

the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

caution: 

Any changes or modifications to this device not explicitly approved by 

manufacturer could void your authority to operate this equipment.

Warranty information

Manufacturer warranties its products to be free of defects in materials and 

workmanship for a period of five (5) years. There are no obligations or liabilities 

on the part of manufacturer for consequential damages arising out of, or 

in connection with, the use or performance of this product or other indirect 

damages with respect to loss of property, revenue or profit, or cost of removal, 

installation or reinstallation.

Please 

Recycle

1061 South 800 East 

Orem, UT 84097

Phone: 800.555.9891

 

 www.vantagecontrols.com

legrand  customers contact: 

vantage customers contact

:

07477r2 09/07

301 Fulling Mill Road Suite G 

Middletown, PA 17057 

Phone: 800.321.2343

 

www.legrand.us/onq

Содержание DRD3










Отзывы: