LEGRAND CHIEF LSCU Скачать руководство пользователя страница 2

 LSCU

Installation Instructions

2

DISCLAIMER

Legrand 

|

 AV and its affiliated corporations and subsidiaries 

(collectively “Legrand 

|

 AV”), intend to make this manual 

accurate and complete. However, Legrand 

|

 AV makes no claim 

that the information contained herein covers all details, 
conditions or variations, nor does it provide for every possible 
contingency in connection with the installation or use of this 
product. The information contained in this document is subject 
to change without notice or obligation of any kind. Legrand 

|

 AV 

makes no representation of warranty, expressed or implied, 
regarding the information contained herein. Legrand 

|

 AV 

assumes no responsibility for accuracy, completeness or 
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.

DEFINITIONS

WARNING

 alerts you to the possibility of 

serious injury or death if you do not follow the instructions.

CAUTION

 

alerts you to the possibility of 

damage or destruction of equipment if you do not follow the 
corresponding instructions. 

MOUNTING SYSTEM: 

A MOUNTING SYSTEM is the 

primary Chief product to which an accessory and/or component 

is attached.

ACCESSORY: 

AN ACCESSORY is the secondary Chief 

product which is attached to a primary Chief product, and may 

have a component attached or setting on it.

COMPONENT: 

A COMPONENT is an audiovisual item 

designed to be attached or resting on an accessory or mounting 

system such as a video camera, CPU, screen, display, 
projector, etc.

 IMPORTANT SAFETY INSTRUCTIONS

 

WARNING

FAILURE TO READ AND FOLLOW 

THE FOLLOWING INSTRUCTIONS CAN RESULT IN 
SERIOUS PERSONAL INJURY, DAMAGE TO EQUIPMENT 
OR VOIDING OF FACTORY WARRANTY. It is the installer’s 
responsibility to make sure all components are properly 
assembled and installed using the instructions provided.

 

WARNING

:  

Exceeding the weight capacity 

can result in instability, causing the cart to tip over resulting in 
death or serious injury! It is the installer’s responsibility to make 
sure the weight of all components attached to the LSCU does 
not exceed 175 lbs (79.3 kg). The Lever Lock™ backplanes 
have a separate weight limit of 10 lbs (4.5 kg). If the Lever 
Lock™ backplane is separated, each half backplane has a 
weight limit of 5 lbs (2.26 kg). (See following graphic)

 

WARNING

:  

Use this mounting system only 

for its intended use as described in these instructions. Do not 
use attachments not recommended by the manufacturer.

WARNING

:  

Never operate this mounting 

system if it is damaged. Return the mounting system to a 
service center for examination and repair.

WARNING

:  

RISK OF SERIOUS INJURY OR 

DEATH! Risk of death or serious injury may occur when 
children climb on audio and/or video equipment furniture. A 
remote control or toys placed on the furnishing may encourage 
a child to climb on the furnishing and as a result the furnishing 
may tip over on to the child. 

WARNING

:  

RISK OF SERIOUS INJURY OR 

DEATH! Relocating audio and/or video equipment to furniture 
not specifically designed to support audio and/or video 
equipment may result in death or serious injury due to the 
furnishing collapsing or overturning onto a child.

NOTE:  

The LSCU cart has no user serviceable parts.

NOTE:  

The LSCU cart can support screen sizes up to a 

maximum of 75" (diagonal size).

--SAVE THESE INSTRUCTIONS--

175 lbs

(79.3 kg)

10 lbs 

(4.5 kg)

Содержание CHIEF LSCU

















Отзывы: