9
Attach a pair of outlets to an electrical box, then attach
accompanying one-piece electrical plate to outlet box
configuration.
3
If outlet box configuration is attached to wiring/conduit
prior to box attachment, remove two-piece electrical plate
from box sidewall, feed configuration through large
opening. Then re-attach two-piece plate to close around
conduit.
4
Attach complete outlet box configuration to projector
mount plate as shown below in figure 12. Secure by
re-attaching nuts removed in Step 1.
5
Projector Mount Plate Electrical Install Option
Remove break away panel from projector mount plate.
2
Remove attached electrical plate from underside of
projector mount plate. Save nuts for reinstall.
1
Figure 9
Figure 10
Figure 12
Figure 11
Cleat adjustment for various tile heights
Loosen screws along side cleat, adjust and retighten as
needed to accommodate for tile height.
1
Figure 13
Placing CMS491/492 into Ceiling Structure
Rotate and drop box to gently rest into place onto drop
ceiling framework.
2
Carefully insert box through opening. Note angled back
edges design which allow box to fit through 2’ x 2’ opening.
1
chamfered corners
for easy clearance
Figure 14
Figure 15
CAUTION:
Avoid sharp
edges.
NOTE:
Remove the cleat entirely to allow the enclosure to be
mounted closer to the tile grid frame.
Loosen and adjust
Installation Instructions
CMS491/492
