Product Overview
Front Panel
Rear Panel
2
(us)
(us)
HDMI H VGA , 3.5mm, RS232, and IR over Cat Extender Dual Gang
Wall Plate Transmitter
-
4K 60Hz
Transmitter
Transmitter
8
SELECT
Input selection button.
9
IR SENSOR
Receives IR signal from IR remote.
10
EDID
EDID Switch for VGA EDID management. For more
information, see EDID Management section.
R
EAR
P
ANEL
D
ESCRIPTION
11
HDBT OUT
HDBaseT Output. Connect to an HDBaseT receiver.
12
Power IN
For local DC 12V input.
13
Power OUT
For DC 12V output when the “Power In” port is connected
to local power supply. If the transmitter is powered by
PoC, this port doesn’t output power.
14
RS232
For RS232 pass-through.
15
IR OUT
IR signal output. Connect to an IR emitter using the 2-pin
phoenix connector provided.
F
RONT
P
ANEL
D
ESCRIPTION
1 VGA IN
VGA input. Connect to a VGA source.
2 VGA AUDIO
Audio input embedded with VGA input.
3 HDMI IN
HDMI input. Connect to an HDMI source.
4 UPDATE
Micro USB port. Connect to a PC for firmware upgrade.
5 Input Selection LEDs
LED On:
Corresponding input channel is selected.
6 HDCP LED
On:
HDCP protected content is being transmitted.
Blinking:
Non-HDCP protected content is being transmitted.
Off:
No content is being transmitted.
7 LINK LED
On:
HDBT link is normal.
Off/Blinking:
No HDBT link or link error.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑫
⑪
⑬
⑭
⑮
Содержание C2G31017
Страница 2: ......