LEGRAND Area box distribution switch Скачать руководство пользователя страница 2

Страница: 2 / 87

Manageable Mosaic switch Installation and User Guide

Important Notice

It is intended for

network administrators who are responsible for installing and setting up network equipment.
This  document  contains  confidential  and  proprietary  information  of  Legrand  and  may  not  be  copied,
transmitted,  stored  in  a  retrieval  system  or  reproduced  in  any  format  or  media,  in  whole  or  in  part,
without  the  prior  written  consent  of  Legrand.  Information  contained  in  this  document  supersedes  any
previous manuals, guides, specifications, data sheets or other information that may have been provided
or made available to the user. This document is provided for informational purposes only, and Legrand
does  not  guarantee  the  accuracy,  adequacy,  quality,  validity  or  completeness  of  the  information
contained  in  this  document.  Legrand  reserves  the  right  to  make  updates,  improvements  and
enhancements to this document and the products to which it relates at any time without prior notice to
the user.  IN NO EVENT SHALL Legrand BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT,
OR  CONSEQUENTIAL  DAMAGES  WHATSOEVER,  INCLUDING  BUT  NOT  LIMITED  TO  LOST
PROFITS, ARISING OUT OF OR RELATED TO THIS MANUAL OR THE INFORMATION CONTAINED
HEREIN,  OR  THE  USE  OF  THE  PRODUCT,  EVEN  IF  Legrand  HAS  BEEN  ADVISED  OF,  KNOWN,
OR SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH DAMAGES.

Trademark Acknowledgement

This document contains trademarks, trade names and service marks of Legrand and other
organizations, all of which are the property of their respective owners.

Warnings and Cautions

If equipped with a laser based SFP tranceiver

LASER WARNING

Fiber optic port of the 0 779 05 switch includes 1310/1550nm Class 1 laser components certified

according to IEC 60825-1 transmitting invisible laser radiation.

•

DO NOT stare into the beam or view directly with optical instruments.

•

Avoid direct exposure to beam.

•

Do not remove the protective covers on the fiber optic connectors until you are

ready to connect the fiber optic cables.

•

When dealing with fiber optic cables, please ensure that the TX at one end of the

link is connected to the RX at the other end of the F/O link.

PORT & SOCKET WARNING

The RJ45 ports are shielded RJ45 data sockets (Ethernet connections). They cannot be used as

analogue telephone or other sockets. The CLI (RS232)

socket cannot be used for USB

ELECTRICAL WARNING

To avoid the possibility of severe and potentially fatal electric shock, never install electrical

devices in a wet location or during a lightning storm. Only a qualified electrician should connect

electrical devices.

LASER WARNING

Fiber optic port of the 0 779 05 switch includes 1310/1550nm Class 1 laser components certified

according to IEC 60825-1 transmitting invisible laser radiation.

•

DO NOT stare into the beam or view directly with optical instruments.

•

Avoid direct exposure to beam.

•

Do not remove the protective covers on the fiber optic connectors until you are

ready to connect the fiber optic cables.

•

When dealing with fiber optic cables, please ensure that the TX at one end of the

link is connected to the RX at the other end of the F/O link.

PORT & SOCKET WARNING

The RJ45 ports are shielded RJ45 data sockets (Ethernet connections). They cannot be used as

analogue telephone or other sockets. The CLI (RS232)

socket cannot be used for USB

connections.

FOR INDOOR USE ONLY

Before configuring your device, please download the latest firmware from the following website

http://www.wifi.legrandelectric.com

and update your device with this firmware.

Warning: for Telnet configuration please read chapter 8 “

Telnet

” before connecting.

Содержание Area box distribution switch
























































































Результаты поиска

Содержание Area box distribution switch

Отзывы:

LEGRAND Area box distribution switch, Руководство по установке и настройке, Страница: 2 / 87

Результаты поиска

Содержание Area box distribution switch

Отзывы: