Manageable Mosaic switch Installation and User Guide
Page 18 of 87
Table 3-2 Port Configuration Options
Parameter
Description
MAC Security:
(Copper ports only)
Allows individual ports to be disabled.
QoS:
(Copper ports only)
Allows setting the Quality of Service parameters of
the port.
Statistics:
Displays various statistics regarding traffic, port
usage, and packets.
SFP: (SFP ports only)
Contains specific information concerning the type of
SFP connector in the port, including type, bit rate,
wavelength, vendor, model type and serial number
NOTE:
On SFP ports, the connector type and other physical descriptions of the port are
found in the SFP tab only, and not in the Properties tab
3.3.2
Configuring the Port Name
Each port can be named in order to identify the user or device connected to that port. In the specific
Port View
window, click the
Name
field to enter the new value and then click Apply.
3.3.3
Factory Default Port Settings
The device ports are factory preset with the following default values:
Table 3-3 Factory Default Port Configuration Values
Parameter
Description
10/100/1000BaseT copper ports:
Status – On
Auto Negotiate – Enabled
Speed – Depends on A/N results
Duplex – Depends on A/N results
MDI – Auto
Flow Control – Enabled
PoE – Disabled on external user ports
SUMMARY