87045 LIMOGES Cedex
Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88
Technical data sheet: F01163EN/00
Cat. no(s).: 882 30
Updated on:
Created on: 23/08/2010
1/5
Configuration tool with screen
2. TECHNICAL CHARACTERISTICS (continued)
1. USE
This parameter setting tool works in a system with detectors.
It is used to receive and send data via infra-red.
- set the detector parameters (Time delay, Daylight setpoint, etc.)
- configure stand-alone detectors from the brand and BUS detectors
belonging to a system
- adjust the system according to the characteristics of the installation
location
- save the Light regulation (maximum of up to 26 configuration files)
- duplicate other detectors (copy/paste a setting type)
- connect BUS products (Push & Learn)
2. TECHNICAL FEATURES
Infra-red communication technology (4 m max.)
In the direction of the product to be measured
At a +/- 15° angle limit in the axis of the PIR transmission and
reception LED (see image)
Backlight screen (automatic switch off)
Weight: 71 g
Impact resistance: IK04
Operating temperature: -5°C to +45°C
Storage temperature: -20°C to +70°C
CONTENTS Page
1. Use . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Technical features . . . . . . . . . . . . . . . .1
3. Navigation . . . . . . . . . . . . . . . . . . . . . .2
4. Standard EN12464-1
recommendations. . . . . . . . . . . . . . . . .5
Display screen
Control and navigation
keys
On/Off and validation
PIR transmission and
reception LED
Function access
keys
Mini-USB
connector
Works with all factory pre-set compatible detectors (infra-red,
ultrasound or dual technology).
The lux parameters adapt to the detector and installation type.
4 m
4 m
+/- 15°
+/- 15°
RECHARGING: Use a mini USB cable (not supplied) for
recharging the configuration tool with a standard
USB socket.
