LEGRAND 5739 12 Скачать руководство пользователя страница 1

SCS BUS SY

S

TEM

1

T E C H N I C A L   S H E E T

 

P

PL

A

M

INT

LG00047-c-UK

 

Touch control

Description

This control is a SCS control, which traditional pushbuttons are replaced by 
capacitive sensors. Moving the finger close to a sensor is the same as pressing a 
pushbutton.
The device can be used to perform the functions typical of a special SCS control by 
simply moving a finger close to the surface. It is produced in the 3 module flush-
mounting version, 6 keys respectively. Each zone corresponding to a key is marked 
at the centre by a light blue LED. When the user moves a finger close to the zone, its 
intensity increases sensibly, and remains so until the finger is moved away again. 
Therefore, the LEDs can have two different levels of light intensity. The brightness 
level of the LEDs can be changed using the appropriate adjustment pushbutton.
The control may operate in four different modes: self-learning, scenarios, swivelling, 
CEN.

The self-learning mode

 (cyclic or non-cyclic) allows to associate to each key 

most of the typical automation system, sound system, video door entry system 
(staircase light, open-door, call to the floor, door lock, and cycling of cameras) 
functions, in additional to auxiliary controls.

The scenario mode

 can be used to recall, program and delete 6 scenarios of a 

scenario module.

-

 The swivelling mode

 can be used to drive the 3 consecutive light points or rolling 

shutters (or rooms or groups)

The CEN mode

 enables using the control with the scenario programmer  

(item 0035 65)

In order to clean the device, it is possible to temporarily disable the sensitive zones 
by pressing two diagonally opposite zones at the same time. The LEDs will flash in 
sequence. Normal operation is automatically reinstated after 10 seconds.

1.  Configurator housing
2.  BUS
3.  LED intensity programming and adjustment pushbutton

Legend

Technical data

Power supply: 

BUS 18 – 27 Vdc

Max. consumption :  

20 mA with configurator in  INT= OFF,4

 

25 mA with configurator in  INT= 0.2

 

35 mA with configurator in  INT=1.3

Operating temperature:  

0 – 40 °C

Depth:  

18.3 mm

2

3

1

5739 12

5739 13

Отзывы: