LEGRAND 5 745 03, Руководство пользователя

Страница: 9 / 24

DEL
F420
2.1
Mode of operation
Your Scenario Control can program up to four scenarios, saving them
in a Scenario Module (F420) which has been enabled for programming.
2.1.1 To program a scenario
To save one or more scenarios:
In the Scenario Module press the pro-
gramming enabling pushbutton.
Its led becomes green:
the module is enabled.
Press the key to program for more than
four seconds.
When the led lights up release the key.
The led flashes to indicate that the pro-
gramming mode has been activated.
t > 4 s
Set the sequence of commands which
make up the scenario.
ON
OFF
light cinema
night relax
DEL
F420
Repeat the sequence to add, edit or cancel a scenario command.
Press the key to end the programming.
Press the corresponding key to activate
the scenario required.
light cinema
night relax
light cinema
night relax
ON
OFF
on
on
2 Use
At the end of the programming you should disable the possibility
of editing the scenarios by pressing the Scenario Module (F420)
enable/disable pushbutton. The led becomes red.
Scenario control
9
EN