background image

Catalogue number(s):  488 43

Controller - 4 x 1-10 V outputs

Technical data sheet: F01121EN/00

Updated on: 

Created on: 22/09/2010

3/3

CONTENTS

6. ParamETEr SETTiNg

NB: All the wiring must be carried out with the mains power off.
Switching the controller on generates an automatic configuration: the 
compatible peripheral(s) and the controller recognise one other on 
their 

 and 

 BUSES.

The parameters of the installation can be set using configuration tools 
Cat. No. 882 35 or Cat. No. 882 30.
Consult the relevant technical data sheets for detailed parameter 
setting of digital detectors that are compatible with the offer.

7. maiNTENaNCE

Do not use: acetone, tar-removing cleaning agents or 
trichloroethylene.
Maintenance with the following products:  - Hexane (En 60669-1) 

- Methylated spirit 
- Soapy water 
- Diluted ammonia 
- Bleach diluted to 10% 
- Window-cleaning products

8. STaNdardS

Directive: CE
Installation standards: NFC 15-100
Product standards: IEC 60669-2-1
Environmental standards: 
-  EU Directive 2002/96/EC: 

WEEE (Waste Electrical and Electronic Equipment) 

-  EU Directive 2002/95/EC: 

RoHS (Restriction of Hazardous Substances) 

- Regulations:  ERP (public buildings) 

ERT (workplace buildings) 
IGH (high-rise buildings)

aTTENTiON:

  An initial test is required for the use of other special 

maintenance products.

Note:

  

All technical information is available at

 

www.legrandoc.com

Отзывы: