17
4.3 Wall mount bracket installation
Wall mount bracket is shown as below.
Installation requirements
The wall mount speed dome can be installed in the hard construction wall in the indoor or outdoor environments.
Before the installation, please make sure:
- The wall is thick enough to install the expansion bolt.
- The wall can at least sustain the 4x weight of the speed dome.
Installation steps
- Draw four holes position in the wall according to the hole of the bottom of the wall mount bracket.
- Dig four holes and insert the expansion bolts (not provided).
- Use four hex bolts and flat washer to fix the bracket in the expansion bolts.
Install the speed dome in the bracket (refer chapter 4.2)
Installation
Hole
