LEGRAND 3486 MyHome, Руководство пользователя

Страница: 41 / 43

41 40
Burglar-alarm unit 3486
User manual
Controlling your home from a distance
The MyHOME system lets you control the functions in your house such as lights, heating and roller
shutters - even when you’re not there - through easy telephone commands
Call your installer to decide which remote functions you wish to activate (lights turning on, heater
...); the installer will properly program the Unit and fill out the memo-card with a short description
of the function related to it.
END
COMMUNICATION
CHECK MEMO-CARD
(see facsimile on the right)
Enter
code
SEND COMMAND
Dial the telephone number. The Unit will answer after the
programmed number of rings; if you have an answering
machine, press ## after it has started to operate
Type in the user code; if it is correct, you will get “executed” as an
answer. If not, the message will be “error”; after three errors, the
Unit cuts the communication
The memo-card is a memorandum to be filled out by the
installer. It contains the codes to be sent and a description that
identifies them
Type in the command on the keypad (e.g. 9912); the Unit will
confirm it with a vocal END message (e.g. executed, roller
shutters up)
9
COMM
ANDS
1
2
3
4
5
6
7
8
9
Code 99 Description
9911 Entrance light ON
9901 Entrance light OFF
9912 Room rolling shutters UP
9902 Room rolling shutters DOWN
BURGLAR-ALARM UNIT
922
SYSTEM STATUS
921
MESSAGE COMMUNICATION
920
ROOM LISTENING
*5*8##
ENABLING
*5*9##
DISABLING
*5*8#1...8#
SEPARATION
Example - By entering the command:
*5*8#1256#
zones 1, 2, 5 and 6 will be active
Answer the call:
• answer the call;
•
press a number;
• type the user code;
• listen to the message;
•
send some commands or hang up.
Commands
Call the control unit:
•
dial the telephone number;
• if an answering machine is connected
enter ##;
•
type the user code;
• enter the controls;
•
hang up.