5
Strictly comply with instructions for installation and use.
1
Receiver description
A. Speaker
B. Melody selection
C. Volume control
D. Additional transmitter pairing
E. Light indicator setting
F. Micro USB socket
G. Indicator light (LED)
2
Transmitter description
A. Name Plate
B. Weatherproof button
C. Light indicator
3
Transmitter/receiver pairing
Additional transmitters pairing: 4 maximum for 1 receiver (See procedure drawing 3)
4
Receiver installation:
wall mounted/free-standing
/
plugged
5
Transmitter installation
with screws/adhesive/free-standing
6
Changing Receiver/Transmitter Batteries
Do not use rechargeable batteries
7
Technical characteristics
Radio operating range: 200 m - 180 m receiver 230 V~
free fields conditions
Receiver sound power: 85 dB - 80 dB receiver 230 V~
Plug-in receiver power supply: 230 V~ - Frequency: 50/60 Hz
Receiver power supply: 3 x 1.5 V AA batteries (not included) / plug
Transmitter power supply: 1 x 3 V battery (CR2032) included
Frequency band: 433.05-434.79 MHz
RF power level: < 10 mW
Degree of protection of doorbell: IP 54 - of the receiver: IP 20
8
Flashing light
9
MP3
1 - Install the software on a computer, from the internal
memory of the doorbell, using the USB cable provided
9
MP3
(continued)
2 - Click on the icon to launch the software
3 -
4 - Click + to import an MP3 melody in the selection window
5 - Select the melody and press play (mandatory 1 time)
6 - Set the duration of your melody by selecting the beginning and the end and then click
✂
7 - The software asks you to confirm where to save the new MP3 file: receiver memory
8 - To set the MP3 melody, select it with the B button
The undersigned, LEGRAND, declares that radio equipment of the type (0 942 72)
complies with Directive 2014/53/EU.
The full text of the EU declaration of conformity can be found at:
www.legrandoc.com
Flashing
Mode
Slow
Fast
Someone rings
Alternating
Low receiver battery
