4/4
Technical data sheet: S000087115EN-2
Updated: 18/02/2016
Created: 09/03/2015
Catalogue number(s): 0 489 41/44/48
Compact motion sensors - PIR
6. SETTING
6.1 Time delay parameter
Sensor parameter
Default value
Modifiable parameters
Time delay
Min.
10 sec to 10 min
Time delay: Length of time the load remains on after detection.
6.2 Light level parameter
Sensor parameter
Default value
Modifiable parameters
Light level threshold
Max.
10 to 1275 lux
Light level threshold: Value at which the load switches on if the
natural light level is below the setting.
6.3 Detection
Automatic switch-on:
- On detection of presence, if there is an insufficient natural light level.
Automatic switch-off:
- If no presence is detected and at the end of the set time delay.
Any new detection triggers automatic switch-on if there is insufficient
light.
7. PERFORMANCE
7.1 Tangential movement
Ø 8 m
2.5 m
m:
4
4
2
2
1
1
0
Ø 4 m
2.5 m
m:
2
2
1
1
0
7.2 Radial movement
8. MAINTENANCE
Keep the lens clean.
Clean the surface with a cloth.
Do not use: acetone, tar-removing cleaning agents or trichloroethylene.
Maintenance with the following products: - Hexane (En 60669-1)
- Methylated spirit
- Soapy water
- Diluted ammonia
- Bleach diluted to 10%
- Window cleaning products
9. STANDARDS
Directive: CE
Product standards: IEC 60669-2-1
Environmental standards:
- EU Directive 2002/96/EC:
WEEE (Waste Electrical and Electronic Equipment)
- EU Directive 2002/95/EC:
RoHS (Restriction of Hazardous Substances)
All technical information is available at
Attention:
Always test before using other special cleaning products.
