6/8
Technical data sheet: S000088482EN-1
Updated:
Created: 02/01/2017
Cat. No(s): 0 489 35
PIR+US ceiling mount sensors
(DALI)
7.2 Light level settings
Advanced mode:
Calibration:
The ambient light level measured with a luxmeter
must then be transmitted to the sensor.
Regulation:
Automatic switch-off of the load 10 minutes after the
daylight setpoint is exceeded with an additional safety threshold
(to avoid lights switching off at the wrong moment).
Light contribution:
Quantity of additional lux provided by the load
being switched on.
When the light contribution parameter is set to "Auto" on configuration
tool Cat. No. 0 882 30/BMSO4001, the sensor automatically calculates
how much light is provided.
Offset function:
Luminaires controlled according to the daylight level.
Used to manage an increased light contribution on the “corridor group”
and thus obtain an even light level in the classroom. This setting consists
of entering a value (% of desired difference in light level) using tool 0 882
30/BMSO4001.
See the DALI product programming manual.
Example of 30% offset:
(*)
The
Display board
group is only possible if the installation includes
a DALI unit Cat. No. 0 488 76. The lighting is only switched on when
presence is detected and can be switched off with a push-button.
Master/Slave parameter setting:
By default, all the sensors are supplied as Slaves, but to manage lighting
they must be configured as the Master.
When configured as the Master, the sensor manages presence and
lighting regulation.
When configured as a Slave, the sensor only manages presence.
7.3 Modifying settings using the configuration tool
0 882 30/BMSO4001: Advanced configuration tool
When the sensor receives an IR command via the configuration tool, a
red LED lights up acknowledging the modification.
For more information about setting parameters, refer to the data sheet
for the configuration tool Cat. No. 0 882 30.
7. SETTINGS (
CONTINUED
)
8.1 PIR - Motion detection
8.2 PIR - Presence detection
Display board
group
(
*
)
Window
group
10%
40%
Corridor
group
8. PERFORMANCE
Height
m :
4
4
2
2
1
1
0
Ø
Low Sensitivity
(25%)
Medium Sensitivity
(50%)
Ø (m)
surface (m
2
)
Ø (m)
surface (m
2
)
Height
(m)
2.5
4
15
6
25
3
5.5
25
6.5
35
4
6.5
35
7.5
45
5
6
30
10.5
90
6
4
15
5.5
25
High sensitivity
(75%)
Very high sensitivity
(100%)
Ø (m)
surface (m
2
)
Ø (m)
surface (m
2
)
Height
(m)
2.5
6.5
30
8
50
3
8.5
60
11.5
100
4
12.5
125
14
155
5
12
115
16.5
215
6
8.5
60
12.5
125
Height
m :
2.5
2.5
0
Ø
