LEGOOIN SWING.001, Инструкция пользователя

Страница: 13 / 22

14
ASSEMBLY INSTRUCTIONS

Place the playground equipment on level ground and not less than 6ft (1.8m) from any
structure or obstruction such as a fence, garage, house, overhanging branches, laundry
line, or electrical wires.

Do not install the playground equipment over, asphalt, packed earth, or any other hard
surface; a fall onto a hard surface can result in serious injury or death to the equipment
user.
TIGHTEN1NG NUTS & BOLTS

For ease of installation, do not over-tighten the nuts and bolts initially when you are
starting to assemble the equipment. This will allow for adjustments duringinstallation.

After you have finished assembling the main components of the metal swing set, go
back and fully tighten all nuts and bolts and close all plastic caps. Check the entire unit
and make sure all parts are properly assembled before allowing children to use the
playground equipment.
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Step 1