manualshive.com logo in svg

LEGO 5981 LuuMa EV3, Руководство пользователя, Страница: 38 / 80

Поделиться
Скачать
LEGO 5981 LuuMa EV3 Скачать руководство пользователя страница 38

38

LEGO, the LEGO logo, MINDSTORMS and the MINDSTORMS logo are trademarks of the/sont des marques de  

commerce du/son marcas registradas de LEGO Group. ©2013, 2015, 2016 The LEGO Group.

LEGOeducation.com

BLUETOOTH
This is where Bluetooth is enabled on the EV3 Brick, and where you 
can choose some specific privacy and Apple iOS settings. Here you can 
also connect to other Bluetooth devices such as another EV3 Brick.

When you select Bluetooth on the Settings page, there are four 
options presented – Connections, Visibility, Bluetooth, and iPhone/
iPad/iPod. To go back to the main Settings screen, press the Down 
button until the check mark at the bottom of the screen is highlighted, 
then press the Centre button for OK.

Bluetooth
It is here that you enable standard Bluetooth on the EV3 Brick. Using 
the Up and Down buttons, select the word ‘Bluetooth’, then press 
the Centre button for OK. A check mark will appear in the Bluetooth 
box. Bluetooth is now enabled on your EV3 Brick, and a Bluetooth 
icon will be shown in the top left of the EV3 Brick Display.

Note: This setting will not allow you to connect to an iOS device. For 
this, you will also need to select the iPhone/iPad/iPod setting (see 
below)!

To disable Bluetooth, repeat the above procedure, this time 
unchecking the Bluetooth box.

iPhone/iPad/iPod
Select this setting if you want to connect your EV3 Brick to Apple 
iOS devices – iPhones, iPads, and iPods – using Bluetooth (make 
sure Bluetooth is enabled on your iOS device). This setting must 
also be enabled when connecting to the EV3 Programming App on 
an iPad.

Note: Using this setting will prevent your EV3 Brick from connecting 
to other non-iOS Bluetooth devices, including computers, 
Chromebooks, Android devices, and other EV3 Bricks!

You cannot enable both standard Bluetooth and Bluetooth 
communication for iOS devices at the same time.

To enable and disable Bluetooth communication for iOS devices, 
use the Up and Down buttons to select ‘iPhone/iPad/iPod’ and then 
press the Centre button for OK. A Bluetooth icon will be shown on 
the top left of the EV3 Brick Display.

EV3 Brick Interface

Enable Bluetooth

NOTE:

Your EV3 Brick will run 

more efficiently if you disable 

the Bluetooth setting 

when it is not in use.

EV3 TECHNOLOGY

Содержание 5981 LuuMa EV3

















































































Отзывы:

Нет отзывов