5
SETUP
STEP 9 (WIRELESS REMOTE CONTROLS ONLY)
If unassembled, plug electrical power cord into power
brick. Plug brick power cord into control box. Secure
connection using cable latch (FIGURE 5). Note: Align pins
before inserting plugs.
STEP 10
Plug electrical power cord into power outlet.
Note: An electrical surge protection device is
recommended (not included).
POWER CORDS MUST NOT INTERFERE WITH ANY
ADJUSTABLE BASE MECHANISMS.
DO NOT WEAVE CORDS THROUGH BASE
STRUCTURE.
WARNING
!
FIGURE 5
HEAD
FOO
T
SYNC
STEP 8 (WIRED REMOTE
CONTROLS ONLY)
Plug remote control cord and
power supply cord into the two
base motor cables (FIGURE 4).
Pivot cable latch downward and
snap cable latch in closed position
(FIGURE 4). Note: Align pins before
inserting plugs. Do not weave
cords through base structure.
FIGURE 4
