13
REMOTE CONTROL 1
REMOTE CONTROL 2
BASE 1
BASE 2
REMOTE CONTROL PROGRAMMING
- SEPARATING 2 BASES (independent movement)
STEP 1
UNPLUG both bases.
STEP 2
Place both bases on their sides close to each other.
CAUTION: DUE TO RISK OF INJURY, TWO ADULTS ARE
3&26*3&%50)"/%-&"/%.07&"%+645"#-&#"4&
STEP 3
On both bases, remove the male plug of the dual sync
cable from the control box port (FIGURE 12).
STEP 4
On both bases, remove the cable inserted into the female
plug of the dual sync cable and insert it into the control
box port (FIGURES 12 and 13).
STEP 5
Remove the battery compartment door (FIGURE 14) from
both remote controls.
STEP 6
Plug BASE 1 into power source. Using a pointed object,
quickly push the learn button on the control box in two
times (FIGURE 13). The underbed light will come on.
STEP 7
Press and hold the LEARN SWITCH on REMOTE
CONTROL 1 (FIGURE 14) until the underbed lighting
goes off.
STEP 8
Repeat Steps 6 & 7 with BASE 2 and REMOTE
CONTROL 2.
CONTROL
BOX
FEMALE
PLUG
CABLE
INSERTED
INTO
FEMALE
PLUG
FIGURE 12
MALE
PLUG
FIGURE 13
CONTROL
BOX
CABLE
REMOVED
FROM FEMALE
PLUG
LEARN
BUTTON
FIGURE 14
LEARN
SWITCH
BATTERY
COMPARTMENT
DOOR
STEP 9
Turn both bases over onto their legs.
CAUTION: DUE TO RISK OF INJURY, TWO ADULTS ARE
3&26*3&%50)"/%-&"/%.07&"%+645"#-&#"4&
