4
TANDEM SYNCING
To tandem sync two bases to operate as one base,
perform the following procedure:
MALE END
(CONNECTS
TO BASE 1)
FEMALE END
(CONNECTS
TO REMOTE
CONTROL)
MALE END
(CONNECTS
TO BASE 2)
FIGURE 2
STEP 1
Locate the sync cable (FIGURE 2).
STEP 2
Unplug both remote control cords from respective base motor cables.
STEP 3
Plug (1) male end of sync cable into motor cable of base 1; place the
other male end of sync cable into motor cable of base 2 (FIGURE 2).
STEP 4
Plug (1) remote control cord into female end of sync cable (FIGURE 2).
Second remote is not needed. Retain for future use.
One remote control will now operate both bases.
POWER CORDS MUST NOT INTERFERE
WITH ANY ADJUSTABLE BASE
MECHANISMS. DO NOT WEAVE CORDS
THROUGH BASE STRUCTURE.
WARNING
!
