3
REMOTE CONTROL PROGRAMMING - 1 REMOTE TO OPERATE 1 BASE
STEP 1
Plug remote control cord into base motor cable
(FIGURE 1). Pivot cable latch downward and snap
cable latch in closed position (FIGURE 1).
NOTE: ALIGN PINS BEFORE INSERTING PLUGS
(FIGURE 1). DO NOT WEAVE CORDS THROUGH
BASE STRUCTURE.
STEP 2
Plug electrical power cord into a working, grounded
electrical outlet.
NOTE: AN ELECTRICAL SURGE PROTECTION
DEVICE IS RECOMMENDED (NOT INCLUDED).
STEP 3
Operate the remote control to verify the base
functions correctly.
FIGURE 1
MOTOR CABLE
REMOTE
CONTROL
CABLE
CABLE LATCH
LINE UP PINS ON REMOTE
CONTROL CORD AND
MOTOR CABLE
POWER CORDS MUST NOT INTERFERE
WITH ANY ADJUSTABLE BASE
MECHANISMS. DO NOT WEAVE CORDS
THROUGH BASE STRUCTURE.
WARNING
!
