13
U
USSEER
R IIN
NSSTTR
RU
UC
CTTIIO
ON
NSS
SSeeccttiioonn
C
Coonntteenntt
PPaaggee N
Noo
1.0
Important Notes
1
2.0
Clearances to Combustibles
2
3.0
Ventilation & Room Size
3
4.0
Operating Instructions
3
5.0
Combustion Monitoring System
3
6.0
Cleaning
4
7.0
Servicing
4
8.0
List of Replacement Parts
4
IIM
MPPO
OR
RTTA
AN
NTT N
NO
OTTEESS
The installation and Servicing of this fire MUST only be carried out by a competent person (such as a CORGI
registered fitter) in accordance with the Gas Safety (Installation and Use) Regulations 1998, the relevant British
Standards, Codes of Practice, the Building Regulations and the manufacturer's instructions.
Failure to comply with the above recommendations could lead to prosecution and invalidate the appliance
warranty.
Always keep a note of the installer's name and address, CORGI registration number, the original purchase
receipt and the date of installation for future reference. Failure to produce these documents may invalidate the
warranty.
The appliance should be serviced regularly to ensure continued safe operation. See the servicing section for
further reference.
Parts of this appliance become naturally hot during use. It is recommended that a suitable fireguard conform-
ing to BS 8423 is used, especially where young children, pets, the elderly or infirm are concerned.
The manufacturer of this appliance considers all surfaces as working surfaces with the exception of the control
knob.
Combustible items, such as flooring and furniture and soft wall coverings (such as blown vinyl or embossed
paper), low temperature surrounds etc may discolour if fitted too close to the fire. See relevant section for fur-
ther details on clearances to combustibles. No combustible materials or flooring should protrude onto the
hearth (if fitted).
This appliance incorporates a combustion monitoring system (ODS).
DO NOT burn any foreign material on this fire. Under no circumstances shall the appliance be used if the
glass front door or panel has been removed or damaged.
Do not place any objects on top of the appliance.
The integral catalyst should be checked by the installer upon servicing to ensure there are no defects or
obstructions that may prevent the satisfactory flow of combustion products.
The expected life of the catalyst is in excess of 11,000 hours (10 years of normal use). After this time the cata-
lyst should be replaced.
This appliance is only suitable for the gas type for which it is supplied.
WARNING: Due to the nature of this product the area around the top of the appliance (i.e. the grille) gets very-
hot. Care should be taken when operating the appliance.
11..00
13
14
15
15
15
16
16
16
