Step 7:
Connect a 3-meter Rappid cable to the T-Connector and run it to the
next light location.
Step 8:
Ensure that the cables can reach the desired light locations, then
secure them to the vehicle side frame and ceiling cross beams using your
preferred method. Legend recommends tuck tape or similar.
Step 9:
Install ceiling liner, if applicable.
Step 10:
Unplug the feed loom from the rest of the circuit. This will make sure
the lights stay off while you are installing them, which will be easier on your
eyes.
Step 11:
Connect the Dome Lights to the Rappid cables. Ensure that the
housings have clicked together.
Legend Light Kit Install Guide v2.2
Page 24 of 36
